1. ZeroFoxGiven

    Fox Please help identify these brake calipers

    Can't seem to find the correct pads for the calipers I have. They are supposed to be for a 2003 Cobra. PBR Castings part #K247-047C 2 Different sets of pads 2 different brands and neither Brands fit! The Spring clips are spaced too wide apart and they don't fit inside the pistons. One set are...
  2. A

    Brakes Shaving 1/16” off rear brake caliper

    Trying to put 15x10s on the rear of my 06 gt, reverse of what everyone says there clear my sway bar but because of how they’re shaped they barely don’t clear the calipers. I’ve heard of people grinding down the top of the caliper to make wheels fit and I’m wondering if this can be accomplished...
  3. K

    2014 Mustang GT/CS - 316mm vs 336mm Front Rotor Replacement?

    Hey guys, I was looking for some new replacement front rotors/pads for my mustang and thought the Z26 Street Warrior package by Power Stop was a good budget replacement. However, when I was going to purchase the parts from Rock Auto I wasn't sure whether to buy the 316mm size or 336mm size. Can...
  4. Sabretooth

    Brakes 5-Lug Converted Brakes / Parts - ID Help!

    I bought a 92 mustang lx about a week ago still learning about it i know it has a 5 lug swap and disc breaks all the way around. now here is my issue. when the car is off the brake peddle is firm an does move much. when its on and i try and use the breaks it goes right to the floor. does anyone...
  5. K


    About brakes
  6. U

    03 mustang brake troubleshooting

    So dumb people that weren’t me failed to maintain their car and ended up running all the way through their rear passenger brake pads and it spit out the inside pad at somebody point in time. It ended up spitting the piston out the caliper too so that’s fun. It’s then driven for an indeterminate...
  7. B

    Brakes 82 four eye brake issue

    Okay so my brakes arent working for some reason. New master cylinder and brake booster new lines and still aren't working. This happened after maybe a month of sitting then i noticed the tranny slipping which i wasnt worried about because i have a built c4 for it waiting to be installed but the...
  8. S

    Best City/Street Brakes (Rotors+BrakePads) for 01 Mustang GT?

    So I've been needing brakes in my Mustang for quite some time, I'm running some worn out brakes in general. I was looking at Power Stop brakes (their z26 kit) but I hear a lot of negative reviews about them. And same thing with any brakes from Autozone, advanced auto parts, and NAPA. Can...
  9. M

    Brakes 1995 3.8 - What kind of bubble flare??

    I'm replacing a couple brake lines on my '95 V6, and boy am I having a time. I'm trying to do this strange bubble flare that's on the ABS end and also that goes into the fitting that connects to the line heading to the rear. I have the Eastwood vise mounted flare tool, but no matter what I try...
  10. O

    2003 GT Vert - Rear end noise

    Just got this ‘03 GT Vert Automatic, 108k miles. The car is making a “rubbing” kinda noise, very noticeable at low speeds <10mph and while turning, not going straight. Could be the tires, brakes, suspension, differential...?
  11. R

    95 Mustang GT ABS brake problem

    so i have a 95 mustang, just got it. parked at my house i put it in reverse and started to back up, i moved 1 foot before the ball joint popped out of the lower control arm on the front driver side. took off the brakes and replaced the ball join and now when i brake at 10-15mph i feel a grinding...
  12. B

    Progress Thread Chirping Brake

    Hey guys new to the forum. So in March of this year I bought a 2001 GT with this brake chirping in the passenger rear wheel. Long story short I have replaced rotors and pads numerous times. Caliper on that wheel as been replaced as long with the hoses. None of this solved the issue , constantly...
  13. 7991LXnSHO

    Fox Brake Pad Material Suggestions

    Hey everyone! I need to talk about tech. That ought to get the moderator’s attention. :-) I need to know what company, brand and line of brake pads and shoes have better than factory grip without a lot of dust mess and a low amount of squeaks. I am not currently working behind a parts counter...
  14. Shane8996GTLX

    Electrical Brake Light Switch

    Alright guys in my last ditched effort to avoid a dealer fix I thought I'd create an account. My brake lights stopped coming on last night when I accidentally tugged on a wire thinking it was my boost tube. I did my research and got under the dash. The pigtail and switch where still intact. I...
  15. annchen

    1968 Convertible With 1996 Gt Disc Brakes...?

    Hello folks, I'm brand new to the Forum, and have had my Mustang now for about five years. I recently came into a heap of parts, for a nice deal, and have jumped the car forward a bit in the total restoration process. Just to keep everyone on the same page, I have a 1968 Mustang Convertible...
  16. G

    Brakes Applying 2006 Mustang Coupe Pony

    I have a 2006 Ford Mustang coupe V6 replace brake booster and master cylinder now car is applying brakes automatically after a short distance 10 to 15 miles once cars let sit up for 10 minutes brakes release did I do something wrong installing a master cylinder booster
  17. J

    Multifunction Switch Help

    Ok I am new here and I could really use a little help. I have a 04 V6 convertible that is having an issue with the brake lights, tail lights, instrument cluster, and any form of blinkers. I have read on other forums on here that it's the multifunction switch. I have replaced the multifunction...
  18. 9

    Brakes Sti Brembo On A Fox

    Alright so i've been able to find myself a nice set of STI brembo's, now i know that there is an old forum already on this topic but i was wondering if anyone had anymore information regarding this topic. like what would i do with the rear e brake cable? i already an full sn95 5 lug swap and i...
  19. S

    Gps Brake Kits

    Recently l have found myself looking for a Disc Brake Conversion for my 66 Mustang Auto. With parts suppliers limited in Canada l ended up talking to one shop that offered a kit made by GPS. I myself have never heard of this company, question is... are they any good, worth looking at or stay far...
  20. 03Mach1AzureBlue

    03 Mach 1 Caliper

    Hey guys, I'm new on here and want to ask a question. Are the front calipers on a 03 Mach 1 the same as the calipers on the same year GT? I can't seem to find mach 1 front calipers i just keep coming across 03 GT and Cobra calipers.