- Mar 2, 2015
- 6,821
- 5,858
- 203
Someone has rebuilt your door panels in the past. Those clips aren't factory 89 clips....they were black and the vinyl has been replaced. Backing board seems to be attached different to metal top plate. An easy way to make door panel moisture plastic is to use crash wrap.
It has adhesive on one side. 3 mil is as thick as a contractor trash bag. Works very well. Tape and plastic works too just doesn't look as good.
I've noticed after owning more that 12 mustangs that a bunch of stuff like door locks and switches need to be cycled a few times after sitting. The contacts sometimes get a little corrosion on them that needs to be worn off. The window motors can be taken apart and serviced. New grease and bushings makes a huge difference. Door lock actuators are a common issue. There are several alternatives in a few threads here. I had good luck recently with LMR actuators.
It has adhesive on one side. 3 mil is as thick as a contractor trash bag. Works very well. Tape and plastic works too just doesn't look as good.
I've noticed after owning more that 12 mustangs that a bunch of stuff like door locks and switches need to be cycled a few times after sitting. The contacts sometimes get a little corrosion on them that needs to be worn off. The window motors can be taken apart and serviced. New grease and bushings makes a huge difference. Door lock actuators are a common issue. There are several alternatives in a few threads here. I had good luck recently with LMR actuators.