Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

manicmechanic007 · Sep 10, 2022

Just dawned on me that the F4DZ is a 1994 (roughly)
Yours was 82-92 if I remember right
Not sure of what Ford number what You need is
I have about 6 or 8 compressors left
I want you to have one if you need one that I have

manicmechanic007 · Sep 10, 2022

Look at ebay item # 184905754768
That is a new old stock one like the ones I have
It is a YC52 that only shows 5.0 and 3.8

manicmechanic007 · Sep 10, 2022

I do not have any of those older compressors, sorry
I would just about gave you one

FastSVO · Sep 13, 2022

manicmechanic007 said:
My box is unopened Do not want to open it unnecessarily
After finding that YC138 number, I punched it into ebay and found item # 313689932257
It does not have the triangular mount I expected to see and that one looks more like a 10P15?
You look at that YC54 they have on there FastSVO, and see if that looks like yours, with the 2 inlets and 2 outlets on top

Yes, those compressors are for newer models. I did find a new "Ranshu" branded 6P148A, but unsure of it's quality.

manicmechanic007 · Sep 13, 2022

On ebay when looking at YC138
Down a few was a new YC 54
That is the one I think you should look at

FastSVO · Sep 13, 2022

manicmechanic007 said:
On ebay when looking at YC138
Down a few was a new YC 54
That is the one I think you should look at

They are close but not an exact match from what I can tell from the pics.

Mustang5L5 · Sep 13, 2022

YC54 is an FS6, not a 6p148

Mustang5L5 · Nov 23, 2022

So I ended up getting my hands on a clean F0ZH-19D623-BA compressor. I ordered the parts to rebuild this. The main seals are easy to find, but the shaft seal seems to be harder to get these days.

I ordered a shaft seal kit based on some of the comments in this thread so I’ll update when the parts all come in.

I’m going to do this one with the intent of making a YouTube vid and then I’ll add it to the first post. I figure the pics and instructions are good, but some folks need to see things done. Plus I’ve been having fun with the whole YouTube channel thing (mustang5l5 is the channel name)

manicmechanic007 · Nov 24, 2022

Good luck with the reseal
I should look and see if I still have any of the special tools left and send them to you
There was a front seal remover that was handy

Mustang5L5 · Nov 24, 2022

I actually do have all the tools already from the first one I did

02 281 GT · Nov 24, 2022

I'm looking forward to the video so I can see how that woodruff key puller works.

limp · Nov 24, 2022

02 281 GT said:
I'm looking forward to the video so I can see how that woodruff key puller works.

You just slide it on, twist it, then crank away

02 281 GT · Nov 24, 2022

limp said:
You just slide it on, twist it, then crank away

You in the market for a new CT?

Mustang5L5 · Nov 28, 2022

Got the new shaft seal from a different vendor. Need to confirm but it looks right.

GPD 1311262

Got it off Rockauto at the cheapest price. Looks like the correct seals, plus new crush washers for the bolts as well as a new c-clip and a misc O-ring I’ll need to identify. Seems as if it’s the parts needed to pull the clutch and front cover off to only change the shaft seal. I’ll open this up shortly to confirm

Body o-rings should be here shortly.

Mustang5L5 · Nov 28, 2022

Looks right.

New seals on the left. Had a leftover seal from the other vendor on right

Online pic doesn’t look right so just ignore that

85GTStangGuy · Nov 28, 2022

Mustang5L5 said:
Got the new shaft seal from a different vendor. Need to confirm but it looks right.

GPD 1311262

Got it off Rockauto at the cheapest price. Looks like the correct seals, plus new crush washers for the bolts as well as a new c-clip and a misc O-ring I’ll need to identify. Seems as if it’s the parts needed to pull the clutch and front cover off to only change the shaft seal. I’ll open this up shortly to confirm

What's the difference between that GPD kit and the Omega Environmental Technologies MT2039 shaft seal kit (which I think is the same as the Santech K20-3115 seal kit) that I currently have squirreled away for possible future use? Quite a difference in price too (<$4 vs >$21), which leads me to believe there is some difference between them.

Mustang5L5 · Nov 28, 2022

85GTStangGuy said:
What's the difference between that GPD kit and the Omega Environmental Technologies MT2039 shaft seal kit (which I think is the same as the Santech K20-3115 seal kit) that I currently have squirreled away for possible future use? Quite a difference in price too (<$4 vs >$21), which leads me to believe there is some difference between them.

Unknown. The photos looks exactly the same as the GPD kit. I have to imagine there aren’t many vendors making shaft seal kits for a 30+ year old compressor.

Mustang5L5 · Nov 29, 2022

Remaining rebuild seals showed up. Arizona air had a $5 charge under $20, so I found the valve core kit for less than that which brought the total to enoigh to not incur the $5 charge. These cores will work on the low side manifold.

Bought new SS bolts as well. Now to find time to sit down and do it. I am going to reuse the clutch. It looks to be in excellent shape.

General karthief · Nov 29, 2022

I knew there was a reason I didn't toss the original compressor from the Junk Pyle.

Mustang5L5 · Dec 10, 2022

Pretty straightford now. Not much to these. This compressor was even cleaner than the one I previously rebuilt. My guess is that it recently came off the car.

I did make a YouTube vid showing me tearing this thing down.

Next up, fully clean this up, and paint the housing.

Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

manicmechanic007

manicmechanic007

manicmechanic007

FastSVO

manicmechanic007

FastSVO

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

manicmechanic007

Mustang5L5

That is…until I whipped out my Bissell

02 281 GT

Agreed...My wife has great Boobs

limp

wrap a little cheese around it and its a done

02 281 GT

Agreed...My wife has great Boobs

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

85GTStangGuy

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

General karthief

wonder how much it would cost to ship you a pair

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Agreed...My wife has great Boobs

wrap a little cheese around it and its a done

Agreed...My wife has great Boobs

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency