Build Thread My Never Ending 89 Notch Thread

Davedacarpainter · Mar 30, 2016

TOOLOW91 said:

Boy that's a pretty car. The color looks similar to what I'm putting on my car.

That's not a solid red, is it. It seems like I can see some sparkle there.

TOOLOW91 · Mar 30, 2016

Davedacarpainter said:
Boy that's a pretty car. The color looks similar to what I'm putting on my car.

That's not a solid red, is it. It seems like I can see some sparkle there.

Sure is a solid . 2d Scarlet red .

TOOLOW91 · Apr 6, 2016

Fixed the man hole cover broken exhaust . I plan on fixing the flange on the pipe now that it's out of the car and selling it. but now I am back in action.

This was what happened

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

Boosted92LX · Apr 6, 2016

TOOLOW91 said:
Fixed the man hole cover broken exhaust . I plan on fixing the flange on the pipe now that it's out of the car and selling it. but now I am back in action.

This was what happened

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

I hate it when that happens. I had a car i tore the exhaust to pieces on those dang gas station tank filler caps. Ripped it to shreds man.

TOOLOW91 · Apr 13, 2016

Lesson for the day ? Catch cans work .
That is all the moisture suspended from the oil that would other wise be in the crank case .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

krazedstang · Apr 13, 2016

TOOLOW91 said:
Lesson for the day ? Catch cans work .
That is all the moisture suspended from the oil that would other wise be in the crank case .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

Doesn't look very purified to me.....

TOOLOW91 · Apr 13, 2016

krazedstang said:
Doesn't look very purified to me.....

Doesn't smell like it either lmao.

FoxMustangLvr · Apr 13, 2016

Looks like some fresh tap water from Mexico. Are you sure you don't have a "xxx" block?

TOOLOW91 · Apr 13, 2016

FoxMustangLvr said:
Looks like some fresh tap water from Mexico. Are you sure you don't have a "xxx" block?

LMFAO - hencho in meaheicooooo

TOOLOW91 · Apr 14, 2016

Who left those ?

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

TOOLOW91 · Apr 20, 2016

Some hi res pics from the other night with my friends . 3 cars together is around 1500hp . Those 2 evos are no joke .The kid with jeep behind my car snapped the pics. That jeep also had a vortech on it. Local guy builds the jeep kit for those trucks intercooled and all .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

TOOLOW91 · Apr 21, 2016

Ordered more 5 lug stuff today. I'm basically down to needing axles , A booster and maybe the rear line kit from MM . And I'm ready to go then I just need wheels .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

89oem · Apr 21, 2016

Nice, be sure you get the sn hub on your axles,

TOOLOW91 · Apr 21, 2016

89oem said:
Nice, be sure you get the sn hub on your axles,

Thanks pal that's the plan .

TOOLOW91 · May 3, 2016

The motor leaks oil .Did i mention that before ? LOL . K member is either getting dropped and replaced along with the pan gasket . Or the motor may come out to be resealed over the winter . One or the other. Next thing is this thing is gonna be at mustang week. I ordered some stuff for it today to start getting ready . 2 mos away and counting . Other then that i have been enjoying the car when i can.

Noobz347 · May 3, 2016

TOOLOW91 said:
Lesson for the day ? Catch cans work .
That is all the moisture suspended from the oil that would other wise be in the crank case .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

This suggests to me that the motor is not getting fully heat soaked before shut-down. If your catch-can is aluminum, that would account for a fair amount of condensation too; not so much for plastic ones.

TOOLOW91 · May 3, 2016

Noobz347 said:
This suggests to me that the motor is not getting fully heat soaked before shut-down. If your catch-can is aluminum, that would account for a fair amount of condensation too; not so much for plastic ones.

Aluminum with the baffle inside that Moroso supplies . That car don't move unless it's 160 degrees or better . 20w50 in it I make sure it's warmed up before I really start stressing it . I usually don't take short trips when I pull it out , my ride from my garage to home is 15 -20 min alone .

Noobz347 · May 3, 2016

TOOLOW91 said:
Aluminum with the baffle inside that Moroso supplies . That car don't move unless it's 160 degrees or better . 20w50 in it I make sure it's warmed up before I really start stressing it . I usually don't take short trips when I pull it out , my ride from my garage to home is 15 -20 min alone .

That's kinda crazy man. If that can gets heat soaked and your oil is at operating temp, there should be that much vapor in the path to be separated. Water injection perhaps? After-cooler?

stang89bidges · May 3, 2016

Hey, i like your tint, what percent did you get? And are they different percents on your doors vs rear glass?

Build Thread My Never Ending 89 Notch Thread

If you're the village idiot what's that make me?

Chicks can make things hard if they’re inspired...

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

It's only an inch or two. What's the big deal?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

I love my Pimp

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

Mustang Master

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

Stangnet Facilities Maint Tech... Er... Janitor

If you're the village idiot what's that make me?

Stangnet Facilities Maint Tech... Er... Janitor

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency