• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

what should i do???

  • Thread starter Thread starter jimc347
  • Start date Start date Sep 25, 2005
J

jimc347

New Member
Sep 25, 2005
77
0
0
Sep 25, 2005
#1
  • Sep 25, 2005
  • #1
okay i picked up a 91 notchback. mods are tfs heads 1.7 rr, track heat upper and lower intake, stage 1 cam, 3:73 gears, 80mm c&l tube, 24# injectors cailerbrated. 70mm throttle body with spacer. 5spd tranny. long tube headers into flowmasters. the problem very doggy down stairs all upper rpm. how can i get more lower.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Sep 25, 2005
#2
  • Sep 25, 2005
  • #2
The stage 1 cam isn't really meant to give low-end power. IIRC, it comes alive around 2500 RPM, and coupled with 1.7 roller rockers, and the Track Heat intake, the mods you listed scream high RPM all over them. You're seeing roughly .530/.542 lift intake and exhaust respectively, so it probably also doesn't have a lot of velocity down low. I'm making this assumption based on the engine being the stock 302. Swapping back to 1.6 roller rockers alone would probably give you back some lower RPM power, but IMO, probably not a whole lot. With a power adder of some sort, you'd probably have a great combination as it sits, but for now, I think your lack of low RPM power is because of too much valve lift, and parts designed for power at higher RPM.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 25, 2005
#3
  • Sep 25, 2005
  • #3
How is the tune? Whats your timing at? Do you have the right spark plugs in the heads? Sometimes guys make mistakes and put stock plugs in alum heads. I had that set up and it was fine down low.
 
J

jimc347

New Member
Sep 25, 2005
77
0
0
Sep 25, 2005
#4
  • Sep 25, 2005
  • #4
yes i do have a standed plug but what should i use and what should i gap it at??? and it is a 302. i did not check timing but what should the base be set at?. also do i need a chip done for this setup?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 25, 2005
#5
  • Sep 25, 2005
  • #5
Use autolite 3924's gapped around .050", set the base timing to 18*. 18* is the hot spot I found for TW heads. Anywhere from 16-20* should work. Use at least 89 gas.
 
J

jimc347

New Member
Sep 25, 2005
77
0
0
Sep 25, 2005
#6
  • Sep 25, 2005
  • #6
i'm using those plugs gapped at 40. is 18 before or after tdc?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 25, 2005
#7
  • Sep 25, 2005
  • #7
18* btdc. Mark it on the balancer before you start the car to set it. Let me know where it was set to.
 
J

jimc347

New Member
Sep 25, 2005
77
0
0
Sep 25, 2005
#8
  • Sep 25, 2005
  • #8
okay. the person i bought this car from said it would need to be tuned and a chip done.
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Sep 25, 2005
#9
  • Sep 25, 2005
  • #9
i've got the same cam/rockers, and it is a little soft down low. when it hits 3k it really runs, that's what a bigger cam is supposed to do.
 
J

jimc347

New Member
Sep 25, 2005
77
0
0
Sep 25, 2005
#10
  • Sep 25, 2005
  • #10
yes i know but i was told the timing or a chip might get some low end back????????
 
You must log in or register to reply here.

Similar threads

C
Dyno day! # guesses?
  • clayton seiders
  • Aug 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
638
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2025
Scrapla347
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
186
The Welcome Wagon Jul 3, 2026
5150K
5
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
LESS THAN 9.5 MPG CITY DRIVING!!!
  • PonyGTrider
  • Dec 15, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 3 4 5
Replies
92
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2023
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?