Wheel Spacers/Painted Calipers...Rolled into one Post DUW

91LX_5L · Apr 6, 2006

looks great, I like those front calipers polished like that and the spacers deff look good!

I just painted mine too:

I also want to get spacers but 1" is too big, I think I might just add longer studs and go with a 1/2" spacer this route is probaly safer then that style of spacer would it not be?

Nobody · Apr 6, 2006

91LX_5L said:
looks great, I like those front calipers polished like that and the spacers deff look good!

I just painted mine too:

I also want to get spacers but 1" is too big, I think I might just add longer studs and go with a 1/2" spacer this route is probaly safer then that style of spacer would it not be?

Wow, that's the best representation of the Roush wheels I've ever seen. Good looking brakes. How about the front?

Blackened302 · Apr 6, 2006

that looks the TITS!!!!!11

94GTLaserRC · Apr 6, 2006

Starman said:
do you have any more pics of the front calipers?? I have a set of PBR's I'm getting ready to put on but wanted to do something with the finish before I did

I just snapped that one on the car...I shouldve taken a pic with the wheel off
I just polished the face of them...NOT the whole thing...they were really pitted, So I would recommend to paint them the color you want, and darken the mounting bracket with black paint (the red part on mine.)

Nobody: Nice looking Schtuff there!!
RC

YEAHLOH95 · Apr 6, 2006

its a secret rc lol but i'll have pics up when i'm done

94GTLaserRC · Apr 6, 2006

YEAHLOH95 said:
its a secret rc lol but i'll have pics up when i'm done

between You and Charlie :Zip2:
RC

SeventyMach1 · Apr 6, 2006

:OT: Matt, that is hawt!!!

The Green GT · Apr 6, 2006

Check out my spacers.
View attachment 478892

j/k I had my wheels off and took a dumb pic before I put them back. lol

Killercanary · Apr 6, 2006

Looks good Rob. I agree with Troy on painting the rotor. Find a highly relfective ceramic paint that will match the spacer in terms of looks. I masked mine before I shot them but Troy's method should work too with letting the pads burn off the paint where they make contact with the rotor. I did mine in a high temp silver paint and they are more grey than silver, but I bought shinier ceramic paint and will be re-doing them before the car gets back on the road here in the next few weeks.

SeventyMach1 · Apr 6, 2006

Killercanary said:
before the car gets back on the road here in the next few weeks.

Pics & vids lest ye be banned!

94TURBO5 O · Apr 6, 2006

Looks nice homey
Yep you gotta do something with those rotors man

I got to get some new pics of mine up with the 18" Cobra R's and 1" spacers.

Killercanary · Apr 6, 2006

SeventyMach1 said:
Pics & vids lest ye be banned!

As soon as the parts start to arrive pics will be posted. I should have the main parts here within the next 2 weeks. Until then... :Zip2:

SeventyMach1 · Apr 6, 2006

Killercanary said:
As soon as the parts start to arrive pics will be posted. I should have the main parts here within the next 2 weeks. Until then... :Zip2:

View attachment 478836 Okay. I just consider your car "the lucky one". Your best time was run on my B-day, so it's special, lol.

Seriuosly, though, it's one of my favorite's and I can't wait to see what it "will " be.

nmcgrawj · Apr 6, 2006

Killercanary said:
As soon as the parts start to arrive pics will be posted. I should have the main parts here within the next 2 weeks. Until then... :Zip2:

I'll bet $5 on a turbo :SNSign:

94GTLaserRC · Apr 7, 2006

Thanks for all the replies.

QUESTION ABOUT THE ROTORS:

Is there an after market rotor that I can "slap on" the backs that allow me to keep my same calipers, looks decent and allows me to keep my E=Brake?

WHich if any?
THANKS!!

RC

Gibbo97 · Apr 7, 2006

http://www.jegs.com/webapp/wcs/stor...1&categoryId=57843&searchItemId=371453&CT=999

Baer Eradispeed +1 rotors

Killercanary · Apr 7, 2006

:OT:

nmcgrawj said:
I'll bet $5 on a turbo :SNSign:

I'll PM you my address so you can send me your $5 because your wrong.

94GTLaserRC · Apr 7, 2006

Gibbo97 said:
http://www.jegs.com/webapp/wcs/stor...1&categoryId=57843&searchItemId=371453&CT=999

Baer Eradispeed +1 rotors

So those will use the STOCK rotor and keep the Ebrake?
THey look nice!!
Do they help at all with braking, or only if I change the calipers?
Thanks
RC

91LX_5L · Apr 7, 2006

94GTLaserRC said:
Thanks for all the replies.

QUESTION ABOUT THE ROTORS:

Is there an after market rotor that I can "slap on" the backs that allow me to keep my same calipers, looks decent and allows me to keep my E=Brake?

WHich if any?
THANKS!!

RC

The pic I posted on the previous page is the Baer Erispeed 13" rear KIT (comes with new brackets etc to move the rotor up from stock location) that keeps the GT caliper. Well ill let you decide how it looks, personally I think it looks good with the front 13" cobra brakes but some say they would like it better with smaller rears to show off the fronts more. So then you can get the kit that was posted above from Jegs which is cheaper and I think its a stock size rotor. Im doing a detailed write-up on the install of the kit I got, it is pretty darn easy only gotta grind down 2 brackets.

Once i get my car on the road ill get more pics of my car with the fronts/rear brakes.

BlackVert · Apr 7, 2006

what ... no close up pics with the painted calipers and the wheels on?

come on man, you are losing it

what are you thinking?

i just painted mine red last month, but i really slopped it on because i figure i'll be replacing the pads before long anyway

about the rotors:

http://forums.stangnet.com/showthread.php?t=610591

i like them, and they make a cool sound when i tap the brakes

Wheel Spacers/Painted Calipers...Rolled into one Post DUW

91LX_5L

Nobody

Blackened302

Active Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

YEAHLOH95

94GTLaserRC

Squint as you approach, lest you be blinded by my

SeventyMach1

Keep it lubed .... keep it straight .... and keep

The Green GT

No 13 year olds are safe around me.

Killercanary

The car that set the bar.

SeventyMach1

Keep it lubed .... keep it straight .... and keep

94TURBO5 O

New Member

Killercanary

The car that set the bar.

SeventyMach1

Keep it lubed .... keep it straight .... and keep

nmcgrawj

Advanced Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

Gibbo97

Killercanary

The car that set the bar.

94GTLaserRC

Squint as you approach, lest you be blinded by my

91LX_5L

BlackVert

Similar threads

Wheel Spacers/Painted Calipers...Rolled into one Post *DUW*

Active Member

Squint as you approach, lest you be blinded by my

Squint as you approach, lest you be blinded by my

Keep it lubed .... keep it straight .... and keep

No 13 year olds are safe around me.

The car that set the bar.

Keep it lubed .... keep it straight .... and keep

New Member

The car that set the bar.

Keep it lubed .... keep it straight .... and keep

Advanced Member

Squint as you approach, lest you be blinded by my

The car that set the bar.

Squint as you approach, lest you be blinded by my

Similar threads

Privacy & Transparency

Privacy & Transparency

Wheel Spacers/Painted Calipers...Rolled into one Post DUW