Cadillac ATS Brembo calipers

Boricua86 · Feb 25, 2020

bird_dog0347 said:
Correct, I bought mine off Rock Auto, they have regular, drilled, drilled and slotted, or just slotted.

Thanks a ton

Boricua86 · Feb 25, 2020

Mustang5L5 said:
M12x40mm length. It does stick out on the backside and is close to the rotor, but no contact.

Removing the original inserts is easy. M14 bolt in the backside. Hold the caliper firm in one hand and a few taps with a hammer and it comes out. The press fit isn't really that tight. Easy to remove.

yeah..... mine are putting up a fight..... those insert refuse to be taken out

gallegos1982 · Mar 27, 2020

I have completed gathering parts for this swap. I purchased the calipers off of Ebay here is the listing; http://rover.ebay.com/rover/1/711-5...0001&campid=5335821607&icep_item=254521332550 Question I have is are these the correct calipers? After comparing the looks of these to the one most are installing the front looks different. I am wondering if its a different manufacturer or if its a different caliper that wont work. Thanks for the help.

Mustang5L5 · Mar 27, 2020

The description states ATS Caliper, but that photos is an XTS brembo

gallegos1982 · Mar 27, 2020

Mustang5L5 said:
The description states ATS Caliper, but that photos is an XTS brembo

For the XTS Ill need the larger 14" Rotor? If so Ill try sending them back. Thanks

Mustang5L5 · Mar 27, 2020

Yes, they need 14” rotor.

is there a box part number that they came with?

gallegos1982 · Mar 27, 2020

No box part number but the sticker on them says RF Caliper 84310368 and LF Caliper 84310367. Are the pads the same as the ATS or are those different as well?

Mustang5L5 · Mar 28, 2020

Pads and hardware the same.

The body has a bigger curve and more offset from the spindle. I have both, I’ll see if I can get a side by side

bird_dog0347 · Mar 28, 2020

I'm debating if I want to go out to that garage and finish these today...

General karthief · Mar 28, 2020

Just do it √

gallegos1982 · Mar 28, 2020

Mustang5L5 said:
Pads and hardware the same.

The body has a bigger curve and more offset from the spindle. I have both, I’ll see if I can get a side by side

Thanks I apreciate all the help. I believe Ive seen them posted by you with the 14" rotor. I already have the cobra setup so Ill just send these back. The ebay seller said follow a return through ebay so hopefully I dont get screwed on my refund. Again thanks for all your help. I was just about to pound out the inserts before I noticed they looked different.

bird_dog0347 · Mar 28, 2020

General karthief said:
Just do it √

Forgot I still needed to paint the rear calipers, clearance the back of the front calipers where the screws thread in, and insert the bushings so that's what I'm currently working on.

bird_dog0347 · Mar 28, 2020

gallegos1982 said:
Thanks I apreciate all the help. I believe Ive seen them posted by you with the 14" rotor. I already have the cobra setup so Ill just send these back. The ebay seller said follow a return through ebay so hopefully I dont get screwed on my refund. Again thanks for all your help. I was just about to pound out the inserts before I noticed they looked different.

Good catch!

I got my calipers from Rock auto for like $120ish each if you haven't checked the yet.

gallegos1982 · Mar 28, 2020

bird_dog0347 said:
Good catch!

I got my calipers from Rock auto for like $120ish each if you haven't checked the yet.

Thanks Ill most likely order them from there once I'm sure Ebay will refund me. I have the Taurus rear calipers ready to install as well when I do this swap. The setup is going to be ATS Fronts, Taurus rears, wilwood 2 to 3 proportioning valve and with 99-04 hydroboost. Ill throw up the loaded Cobra caliipers, and all parts associated for sale after the swap.

90redfoxcnotch · Apr 4, 2020

Hey guys name is John, I am new to this forum and new to this brembo upgrade but been a fox body guy since I was 19yrs old (48 now LOL)... quick question for you guys doing the Cadillac brembo upgrade...so I just purchased Cadillac Brembos off of eBay...add states fits cadillac ATS but also shows it fitting CTS and XTS...here is the part number 84544159...had no idea there was a difference until looking on here which I unfortunately did after purchasing the calipers...will this work on the 13" rotors or is this only good for 14"? I am planning on mounting these on 94-95 sn95 spindle. Thanks for any info you can help me with.

Electronics, Cars, Fashion, Collectibles & More | eBay

Buy & sell electronics, cars, clothes, collectibles & more on eBay, the world's online marketplace. Top brands, low prices & free shipping on many items.

rover.ebay.com

bird_dog0347 · Apr 4, 2020

Welcome, nice to have you here.

I checked that first part number on the ad against Rock Auto and didn't see it... I see
Buyer's Guide : ACDELCO 1722768 Caliper

CADILLAC	ATS	2013-2019
CADILLAC	CT6	2016-2020
CADILLAC	CTS	2014-2019

Please refer to catalog for application details.

I did put a list of parts I ordered in my build thread for this... and the pictures look correct but @Mustang5L5 would be able to compare the XTS for you.

90redfoxcnotch · Apr 4, 2020

bird_dog0347 said:
Welcome, nice to have you here.

I checked that first part number on the ad against Rock Auto and didn't see it... I see
Buyer's Guide : ACDELCO 1722768 Caliper

CADILLAC ATS 2013-2019
CADILLAC CT6 2016-2020
CADILLAC CTS 2014-2019

Please refer to catalog for application details.

I did put a list of parts I ordered in my build thread for this... and the pictures look correct but @Mustang5L5 would be able to compare the XTS for you.

Thank you...yeah its kind of confusing because I checked Rock Auto also and it doesn't find that part#...but if you look at the add on eBay it shows that it fits 2013-2019 ATS and it says its interchangeable with other part #s...hopefully I got the right ones especially since I sanded one already and prepared it for paint LOL

bird_dog0347 · Apr 4, 2020

90redfoxcnotch said:
Thank you...yeah its kind of confusing because I checked Rock Auto also and it doesn't find that part#...but if you look at the add on eBay it shows that it fits 2013-2019 ATS and it says its interchangeable with other part #s...hopefully I got the right ones especially since I sanded one already and prepared it for paint LOL

precisely why I didn't buy mine off Ebay, but rather a parts seller...

90redfoxcnotch · Apr 4, 2020

bird_dog0347 said:
precisely why I didn't buy mine off Ebay, but rather a parts seller...

Yeah, just figured these guys looked pretty reputable...had a lot of good reviews...who knows I guess i will find out LOL...wish there was better way to tell if they will work by looking at them.

90redfoxcnotch · Apr 4, 2020

bird_dog0347 said:
precisely why I didn't buy mine off Ebay, but rather a parts seller...

Thank you for the help by the way...its much appreciated

Cadillac ATS Brembo calipers

Active Member

Active Member

Member

That is…until I whipped out my Bissell

Member

That is…until I whipped out my Bissell

Member

That is…until I whipped out my Bissell

still married haven't seen testicles in years

wonder how much it would cost to ship you a pair

Member

still married haven't seen testicles in years

still married haven't seen testicles in years

Member

Member

still married haven't seen testicles in years

Member

still married haven't seen testicles in years

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency