Should I go to 24's?

[drewzx3]

Alright with my mods below I jsut added a set of gt40p heads that have a little bowl work and shaved .40" I got a tune scheduled for the 17th should I go ahead and get 24lb injectors?

 

[Adam95GT]

to be safe i would your almost at your limit for 19's and if your going to id add a 190 or 255 walbro

 

[earleys94gt]

24's would be a good step up, but if you have plans of either going to a stroker or forced induction down the road, you may want to think about going bigger. You don't want to end up buying things twice.

If you just plan on a H/C/I, bolt-on motor then the 24's will be fine.