Time to get Pimpin"

Mstng93SSP · Jan 18, 2020

a91what said:
We can tune it mass air if you wanted too.... setup takes time but it just flat works

The speed density setup for now is fine. I think the best for me is to ease into this....

a91what · Jan 18, 2020

No problem, the nice thing about mass flow is it takes into account air density so you do not have so many extra curves to adjust.

Mstng93SSP · Jan 18, 2020

I'm good either way. If you want to tune it mass air I can throw the meter back in easily. Let me know.

Noobz347 · Jan 18, 2020

a91what said:
No problem, the nice thing about mass flow is it takes into account air density so you do not have so many extra curves to adjust.

That is what's funny. His air density is pretty much a constant. LoL

Mstng93SSP · Jan 18, 2020

Current air density in Mililani Hawaii.

Mstng93SSP · Jan 18, 2020

Does anyone know where I can get this dashboard? I'm not sure if this is a custom dash that someone made or not. I like the layout.

96pushrod · Jan 18, 2020

Mstng93SSP said:
Does anyone know where I can get this dashboard? I'm not sure if this is a custom dash that someone made or not. I like the layout.

It’s on the thumb drive included with the controller. There are a couple different ones on it, if I remember correctly.

I’ve been using that layout, it’s real handy

Mstng93SSP · Jan 18, 2020

Yeah I had several on my thumb drive. Unfortunately this wasn't one of them.

a91what · Jan 18, 2020

Can you post the manual for the ECU, let me see if it's already pinned into the harness or not.

Mstng93SSP · Jan 18, 2020

This?

a91what · Jan 18, 2020

nope, its the one with the ecu pinout for the pimpxs usually on the usb they send.

Mstng93SSP · Jan 18, 2020

Sorry. Here it is

a91what · Jan 18, 2020

Using maf will require a jumper placed in JP10 and JP29 this will bring the signal in on the factory wiring.

I also see EEC pin 55 can be used as relay control for say a cooling fan. but thats not pinned into the fox harness. I do not see the WOT relay thats on pin #54 of the EEC for shutting the AC off at WOT.

You always have the option of moving wire pins to make it all work, adding a circuit from the options port of the Pimp is also an option.

pages 14-20 of the manual.

Mstng93SSP · Jan 18, 2020

Ok. Do you want me to put in the two jumpers and hook the maf back up? I can easily do that before we tune. Let me know.

a91what · Jan 19, 2020

Mstng93SSP said:
Ok. Do you want me to put in the two jumpers and hook the maf back up? I can easily do that before we tune. Let me know.

You can, actually it wont hurt to have the maf in place and reading even if we dont use it. It's another quantitative element.

Now is it a restriction? What maf is it? If stock leave it off

Mstng93SSP · Jan 19, 2020

Ok. It won't be a restriction, it's aftermarket. I will throw it back on and do the jumpers.

96pushrod · Jan 19, 2020

@Mstng93SSP Here's that dashboard, plus another they include.

Mstng93SSP · Jan 19, 2020

Awesome. Thanks. Just finished up with steve @a91what and my car runs AMAZING!!!!! I highly recommend his services. Great guy to work with.

a91what · Jan 20, 2020

Did the car give any trouble with hot restart after sitting for 15mins? how about cold start next day?

Noobz347 · Jan 20, 2020

a91what said:
Did the car give any trouble with hot restart after sitting for 15mins?

What does it mean when this happens?

Time to get Pimpin"

You have a nice rear end there Dave.

SendMeUrDataLog

You have a nice rear end there Dave.

Stangnet Facilities Maint Tech... Er... Janitor

You have a nice rear end there Dave.

You have a nice rear end there Dave.

I think they're a little easier to get off

You have a nice rear end there Dave.

SendMeUrDataLog

You have a nice rear end there Dave.

Attachments

SendMeUrDataLog

You have a nice rear end there Dave.

Attachments

SendMeUrDataLog

You have a nice rear end there Dave.

SendMeUrDataLog

You have a nice rear end there Dave.

I think they're a little easier to get off

Attachments

You have a nice rear end there Dave.

SendMeUrDataLog

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency