Build Thread My Never Ending 89 Notch Thread
- Thread starter TOOLOW91
- Start date
Out of everyone here , im probably one of the few here that’s been 7400rpm plus with a tfi no lift shifting lol. I kept mine it’s in the attic because I know it works.TFI Hater!
Made a little more progress Guide plates on aligned and rockers on with valve lash set ready to go.
Hit the oil pump withe priming tool - 60 psi cold still. Rolled it by hand and few times and rechecked all the rockers. Time to keep moving forward
Hit the oil pump withe priming tool - 60 psi cold still. Rolled it by hand and few times and rechecked all the rockers. Time to keep moving forward
We’re back ! Took it for a ride and this thing is still pretty quick 
Nice little 75 mile cruise today. Weather started off iffy and then got really nice.
Habu135
5 Year Member
Sent you a DM regarding your Box R. I'm having some install and compatability challenges.
Last edited:
Take a look at the pics in this post as it shows a pretty healthy spacer:
Build Thread Post in thread 'My Never Ending 89 Notch Thread'
Habu135
5 Year Member
The Box R comes with that spacer. I need aftermarket fuel rails and will likely need to move my fuel pressure regulator. Curious now what other challenges await on this install.Take a look at the pics in this post as it shows a pretty healthy spacer:
Build Thread Post in thread 'My Never Ending 89 Notch Thread'
Dream drag wheel setup acquired
Guy posted them up for 3k and lived down the street. Ended up snagging them for 2700
There’s 3868$ just in wheels here.
The rear tires are to big they were on a cobra so I am going to swap out my et street r off my pro stars I have
Rears are 15x10 6.5 bs which is what I run on my prostars so fitment will be the same with the 275/50/15
Stoked for these
Guy posted them up for 3k and lived down the street. Ended up snagging them for 2700
There’s 3868$ just in wheels here.
The rear tires are to big they were on a cobra so I am going to swap out my et street r off my pro stars I have
Rears are 15x10 6.5 bs which is what I run on my prostars so fitment will be the same with the 275/50/15
Stoked for these
If it was wider I feel like it would loose the look a bit
On my 66 I have a 15x6 to mimic a big and little and works but you can tell the difference
I had to try this just to see what it would look like
I considered the JMS 10 holes at one point with the 15x10 rear in the silverI had to try this just to see what it would look like
DRAG PACK STREET OR DRAG RACE 5 LUG 10 HOLE PHONE DIAL WHEELS 15x10 5X
VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs THAT HAVE BEEN CONVERTEED TO THE FORD 5X114.3 (5X4.5") bolt pattern. You get two 15x10" 5X114.3 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 5X114.3 -13 offset (1.75" backspacing) wheels. These...
www.vmsracing.com
VMS sorry , and they take stock ford caps as well
DRAG PACK STREET OR DRAG RACE 5 LUG 10 HOLE PHONE DIAL WHEELS 15x10 5X
VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs THAT HAVE BEEN CONVERTEED TO THE FORD 5X114.3 (5X4.5") bolt pattern. You get two 15x10" 5X114.3 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 5X114.3 -13 offset (1.75" backspacing) wheels. These...
VMS sorry , and they take stock ford caps as well
I really dig that rear wheel.
Daaaaaaaaaaaaaaaaaaaaayum yous! I was wishing for a wheel like that [way] before LMR came out with their 17s.
Now, I have to decide all over again.
What a great problem to have.
