Build Thread My Never Ending 89 Notch Thread

TOOLOW91 · Aug 30, 2017

92Apocalypso said:
oh and lastly, license plate is amazing.

Lmao . Thanks for the kind words !

Bullitt347 · Aug 31, 2017

TOOLOW91 said:
Tons left in the 60 . It's a pig . 3408 with me in it and a little more then a quarter tank. Full interior with a stereo , 03 cobra driver seat is super heavy . Never had it on individual scales to see the bias .

Stock front arms and k member still .

A friend of mine has a 93 vert that weighs 3370 that can 60' a 1.30 and better at times on the 235/50/15 MT Pro drag radial. You have more tire than that so it should be able to run a number once you get the chassis set up right. I have gone 1.29 60' on the 26' x 8.5 Hoosier with a stock type rear suspension. My car weighs 3150 with me in it. Getting the car scaled will give you a direction to go with adjustments. A quality double adjustable rear shock is almost a must.

Tubbster66 · Sep 4, 2017

Just saw someone's Mustang on Hot Rod Magazines pop up on my news feed on FB.

TOOLOW91 · Sep 4, 2017

Tubbster66 said:
Just saw someone's Mustang on Hot Rod Magazines pop up on my news feed on FB.

Thanks man !

TOOLOW91 · Sep 4, 2017

Bullitt347 said:
A friend of mine has a 93 vert that weighs 3370 that can 60' a 1.30 and better at times on the 235/50/15 MT Pro drag radial. You have more tire than that so it should be able to run a number once you get the chassis set up right. I have gone 1.29 60' on the 26' x 8.5 Hoosier with a stock type rear suspension. My car weighs 3150 with me in it. Getting the car scaled will give you a direction to go with adjustments. A quality double adjustable rear shock is almost a must.

Absolutely . All in due time ! I appreciate the advice I will definitely keep you posted once I start digging in

TOOLOW91 · Sep 22, 2017

So since the renegade swap I have been battling destroying belts . Big time . Like I've gone through 160bucks in blower belts trying to chase this all down . I will say Vortech has been a huge help to me , between my buddies @84Ttop @93TRANSAM and the guys at Vortech themselves everyone has been a huge help .

What it's come down to is ASP machined my crank pulley off by a few thousandths and I believe that is where the issue certainly is .

a91what · Sep 22, 2017

That would most certainly cause edge damage to the belt.

Noobz347 · Sep 22, 2017

They should replace the pulley and the consumed belts if the new pulley ends up fixing it.

TOOLOW91 · Sep 22, 2017

Noobz347 said:
They should replace the pulley and the consumed belts if the new pulley ends up fixing it.

As long as they make good on the pulley I can even live with not getting the belt cost out of them .

TOOLOW91 · Sep 22, 2017

In other news I also ordered a 0-100 psi transducer for my Holley so I can log real time fuel pressure now . Also have 120 lb Holley injectors coming to replace the 60s so we can put real gas in and let it make some power

TOOLOW91 · Sep 23, 2017

Just to Be exact . Brought my feeler gauges home .

TOOLOW91 · Sep 25, 2017

These showed up today

Davedacarpainter · Sep 25, 2017

Ooohhhhhh! Pretty! What size?

TOOLOW91 · Sep 25, 2017

Davedacarpainter said:
Ooohhhhhh! Pretty! What size?

120s . Lol

Davedacarpainter · Sep 25, 2017

TOOLOW91 said:
120s . Lol

Holy crap!

TOOLOW91 · Sep 25, 2017

Davedacarpainter said:
Holy crap!

60s were way out in the 90% duty range and the minute you really try to lean on it aka 20psi on the dyno that day for muscle mustang it was over 100 percent duty according to the Holley and that's not good with me . Thank god I didn't put more
Timing in it

Davedacarpainter · Sep 28, 2017

Hey Jeff, I saw your car in Mustang 360 brother! Even with a picture of you too! Congratulations my friend, lot of hard work by you and Nick and others (mostly you). I'm impressed, good job

BTW, my son loves your car.

TOOLOW91 · Sep 29, 2017

Davedacarpainter said:
Hey Jeff, I saw your car in Mustang 360 brother! Even with a picture of you too! Congratulations my friend, lot of hard work by you and Nick and others (mostly you). I'm impressed, good job

BTW, my son loves your car.

Thanks bud !

TOOLOW91 · Oct 15, 2017

Well got the new pulleys . Still in the same predicament . Trying to work on that .

Anyway I needed a shift light but was never happy with how the looked just mounted . Worked on this little project . It's a raptor light . I trimmed a little more then I should have in some spots but once it's in the dash I don't think you'll notice .

RaggedGT · Oct 15, 2017

I like it

Build Thread My Never Ending 89 Notch Thread

If you're the village idiot what's that make me?

I have been doing it wrong this whole time

Advanced Member

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

SendMeUrDataLog

Stangnet Facilities Maint Tech... Er... Janitor

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

Chicks can make things hard if they’re inspired...

If you're the village idiot what's that make me?

Chicks can make things hard if they’re inspired...

If you're the village idiot what's that make me?

Chicks can make things hard if they’re inspired...

If you're the village idiot what's that make me?

If you're the village idiot what's that make me?

Been here over a DECADE and still no CT

Similar threads

Privacy & Transparency

Privacy & Transparency