That’s what I was attempting but these tubes are some big mofos . I might have to dent them . I finally said I had to call it a night .I have had to start all the bolts and slowly work my way around and tighten each one a turn or two at a time. Talk about a pita
Thought about that tooHad the same problem with my 6228s. Nothing a bfh and an old socket extension cant handle. I also opened up the bolt holes in the flange to the next 1/32 up, and had to use arp bolts for the smaller head profile. I trashed the bolts that came with the headers, they were all the same 5/16 thread but some needed a 3/8 wrench and some a 10mm
Don’t think they’ll fit , you have a link to the 5/16th bolts you mentioned ? I’m back from Florida from visiting family so time to get crackingWhat about socket head screws? Werent an option for me because of the tube routing (and the high port pattern) but iirc they worked fine with my bbk shorties on yhe standard pattern.
West palm , sisters going to nova university in Lauderdalewhat part of Florida were you/
You da man !Apologies, they were kooks... the description for these is either wrong or they sent me the wrong parts.... there were actually 2 different bolt types in the bag one set had an allen head and was tapered. I will post the part number from my summit order but when i get home if i still have the bag i will post the number from it if its different.
KOK-SB-B60027
5/16 thread, just so we're on the same page (highports are weird, the normal sbf stuff is 3/8 thread), theres not a "kit" for them I just got like 4 packs of five 5/16-18 by 3/4" long bolts from arp (through summit). Still use a 3/8 hex head iirc.Don’t think they’ll fit , you have a link to the 5/16th bolts you mentioned ? I’m back from Florida from visiting family so time to get cracking
Yeah I didnt realize you said highport at first , i have the normal 3/8 sbf stuff .5/16 thread, just so we're on the same page (highports are weird, the normal sbf stuff is 3/8 thread), theres not a "kit" for them I just got like 4 packs of five 5/16-18 by 3/4" long bolts from arp (through summit). Still use a 3/8 hex head iirc.
Amazon . Mesh split loom it was listed as like data cable loom . It’s what they use on my Holley harness so I wanted it all to matchI like that black loom on the wires. Where do you get it?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?