Build Thread My Never Ending 89 Notch Thread
- Thread starter TOOLOW91
- Start date
http://www.behindbarsracecars.com/GM-to-Ford-IAC-adaptor-p/bbrciac.htm
Ask and you shall receive . And it’s half the price of the fast one . takes a gm screw in iac
No problem ! All of his stuff is top notch . I have the rails and the tank now too .
Just make sure you brake clean the iac adapter out, I always check for any machining debris
SOB, where were you when i ordered my accufab one :banghead:
Finally !!!!! Now the regulator sits up where it should.
Some pampering is needed these days . I try to wear gloves as much as i can though for real . No need to have nasty hands all the time when you can accomplish most things with the glove on . Sometimes you need to go raw to get the right touch though if ya know what i mean
Wait wut ?
@Noobz347 you gotta see this!!!Sometimes you need to go raw to get the right touch though if ya know what i mean
This weeks project . My right headlight is delaminating . I have a full spare set from the originals I had installed . Way back I had an accident and the side marker got broken which prompted me to buy a new set when they still made them . Fast forward I found another right side set alone and bought it to have a complete set of headlights again . Set number 2 started to have moisture in the light . So it ate the chrome inside .
So i swapped it for another that had a slight lamination issue. Over the last 2-3 years it’s gotten worse . So I decided to take my original lenses in the box . Use the back housing from set one and the mint lense from set 2 to make a perfect pass headlight again . All without having to remove right side number 3 I found on eBay by itself with the corner marker years ago.
Pic of the one that’s on the car .
I scraped all the sealer out of the cracks . Re sealed with Bead grey the right stuff . Hopefully we are moisture free .
7-9 minutes at 250 in the oven opens these up by the way.
one day I’d like to buy the smoked “ ultra clear “ lenses with no lines to do a retrofit but not a priority .
So i swapped it for another that had a slight lamination issue. Over the last 2-3 years it’s gotten worse . So I decided to take my original lenses in the box . Use the back housing from set one and the mint lense from set 2 to make a perfect pass headlight again . All without having to remove right side number 3 I found on eBay by itself with the corner marker years ago.
Pic of the one that’s on the car .
I scraped all the sealer out of the cracks . Re sealed with Bead grey the right stuff . Hopefully we are moisture free .
7-9 minutes at 250 in the oven opens these up by the way.
one day I’d like to buy the smoked “ ultra clear “ lenses with no lines to do a retrofit but not a priority .
Habu135
5 Year Member
Do you prefer gas or electric?This weeks project . My right headlight is delaminating . I have a full spare set from the originals I had installed . Way back I had an accident and the side marker got broken which prompted me to buy a new set when they still made them . Fast forward I found another right side set alone and bought it to have a complete set of headlights again . Set number 2 started to have moisture in the light . So it ate the chrome inside .
So i swapped it for another that had a slight lamination issue. Over the last 2-3 years it’s gotten worse . So I decided to take my original lenses in the box . Use the back housing from set one and the mint lense from set 2 to make a perfect pass headlight again . All without having to remove right side number 3 I found on eBay by itself with the corner marker years ago.
Pic of the one that’s on the car .
I scraped all the sealer out of the cracks . Re sealed with Bead grey the right stuff . Hopefully we are moisture free .
7-9 minutes at 250 in the oven opens these up by the way.
one day I’d like to buy the smoked “ ultra clear “ lenses with no lines to do a retrofit but not a priority .
mikestang63
SN Certified Technician
This weeks project . My right headlight is delaminating . I have a full spare set from the originals I had installed . Way back I had an accident and the side marker got broken which prompted me to buy a new set when they still made them . Fast forward I found another right side set alone and bought it to have a complete set of headlights again . Set number 2 started to have moisture in the light . So it ate the chrome inside .
So i swapped it for another that had a slight lamination issue. Over the last 2-3 years it’s gotten worse . So I decided to take my original lenses in the box . Use the back housing from set one and the mint lense from set 2 to make a perfect pass headlight again . All without having to remove right side number 3 I found on eBay by itself with the corner marker years ago.
Pic of the one that’s on the car .
I scraped all the sealer out of the cracks . Re sealed with Bead grey the right stuff . Hopefully we are moisture free .
7-9 minutes at 250 in the oven opens these up by the way.
one day I’d like to buy the smoked “ ultra clear “ lenses with no lines to do a retrofit but not a priority .
I can only imagine wifey coming home and asking,, hey what are you making for dinner? it smells terrible!
Lmao!!!!! I used the foil I figured If it did melt I wasn’t out a baking sheet . No issues though honestly . Zero smells. Nothing melted . All done .
Headlights swapped . LEDS in my new tailights too . Decided to switch it up a bit.
