Build Thread My Never Ending 89 Notch Thread

  • Sponsors (?)


Making moves here

4B4E926B-E19C-4F37-A001-DF48733F49FE.jpeg
 
  • Like
Reactions: 4 users
Details on that trans cooler? Or did you already post about it and I need to search? Need to eventually do something similar and would love to see how yours is mounted.

Assuming that is a trans cooler anyway, also can't remember if you're a2w or not....
 
Details on that trans cooler? Or did you already post about it and I need to search? Need to eventually do something similar and would love to see how yours is mounted.

Assuming that is a trans cooler anyway, also can't remember if you're a2w or not....
It’s a Derale Electra cool DEL-13900 . Has -6an ends on it already comes with a temp sensor for the fan control . Really nice piece. I’m hoping I shouldn’t have any cooling issues with it .

No a2w or a2a . I decided to give the snow meth kit a shot since so many guys are doing with with success
 
This big shiny thing needs a good cleaning and polish .

I need to get the right size SERP belt before I can finish the blower bracket and permanently mount it again .

D8D86E59-B6F7-49E4-ACDF-E9044393D5FA.jpeg
 
  • Like
Reactions: 6 users
So progress has slowed a bit . I had a small procedure done on my eye last week but all is well and we are back at it .

So anyone who has Vortech and tries a factory ac delete knows the tensioner hits the water pump pulley . Some guys use a 97 power steering pulley . It works but isnt perfect . Some guys cut the pin and rotate the tensioner . That’s cool but I don’t feel warm and fuzzy about it . So I drilled some new key way holes and bingo one works. The one closest to the original hole is perfect . So 81 inch belt . Factory ac delete . 93 cobra water pump pulley , 8 inch renegade with the under drive accc pulley and this works perfect . Now I can finish the blower install . Ps it’s all back apart and the tensioner was stripped and re painted now that it works .

FED97E01-A010-4201-AF42-1930CFD9ACFB.jpeg
3B650CE8-ED87-48DC-866C-2AD4D1C7BD51.jpeg
B79A31C5-F422-47F2-BC19-65DB67BE4FA1.jpeg
3DF28D13-184C-4356-9309-5B8B44C14881.jpeg
8085D097-8445-4D56-B229-9F781523F4CC.jpeg
 
  • Like
  • Winner
Reactions: 3 users
Blaaaaaaah that’s nice! I’m so torn between going centrifugal ( V3 or P1) vs picking up this flowzilla kit a guy has down the road from me, well like 5 hrs away, and Fabing the manifold for air to air cooler. It’s a hard decision. Any who that looks nice and clean, like those Scott rod panels.
 
  • Like
Reactions: 1 user
Blaaaaaaah that’s nice! I’m so torn between going centrifugal ( V3 or P1) vs picking up this flowzilla kit a guy has down the road from me, well like 5 hrs away, and Fabing the manifold for air to air cooler. It’s a hard decision. Any who that looks nice and clean, like those Scott rod panels.
Vortech !!!
 
CD84B808-F554-4CE7-8020-CC602298BB7F.jpeg
904BD6E0-0FF6-4B6D-9D12-04E9DFE61481.jpeg
164ED537-ABA4-4AD6-B714-8B1F891F49BD.jpeg
9D21026B-E19C-4457-9FF3-4565C4F50129.jpeg


PS line is getting a 90 it’s just mocked up . Blower is officially on . Had to sit intake on to see . I’m a happy camper
 
  • Like
Reactions: 2 users
Something better then nothing ? Quarter glass is tinted and ready to go in . Lol

Started working on the wiring in the trunk and re doing and hiding the amplifiers for stereo .

3E1185C1-6DCD-4A47-83C1-BE1DBF42B694.jpeg
782AAA7E-B7F6-4FE5-A8FB-0F750E5BF7C7.jpeg
85CDE863-3700-448A-8EB5-00BF91541E13.jpeg
 
  • Like
Reactions: 6 users